Event carbon footprint: the 9 emission categories you need to know (and who holds the data)

Bilan carbone d'un événement : les 9 postes d'émissions à connaître (et qui détient la donnée)
  • November 17, 2026

Measuring an event’s carbon footprint often seems overwhelming: where do you start, what do you count, and with what data? The answer comes down to a simple framework. At least 9 emission categories cover the full footprint of an event, whatever its format.

But knowing the categories isn’t enough. The real bottleneck in an event carbon assessment is data collection, and most of that data isn’t held by you but by your suppliers. For each category, we therefore specify who holds the data: this is the question to ask at the contracting stage, not after the event.

One piece of advice before you begin: don’t aim for perfection in your first assessment. A realistic estimate based on orders of magnitude is better than an incomplete assessment. You’ll refine it from one edition to the next.

1. Planning and setup/teardown

An event is first and foremost hours of work: weeks, sometimes months, of preparation upstream, then setup, and finally teardown. This category accounts for the person-hours dedicated to organizing the event on the one hand, and the on-site setup and teardown time on the other.

Upstream time

Every day worked upstream carries its share of emissions: office space (heating, electricity), digital usage, and business travel related to preparation (site visits, meetings, supplier appointments).

This category is often invisible in assessments because it isn’t visible on the day itself. Yet it is simple to measure, in person-days spent on the project.

👉 Who holds the data? You and your event agency: the number of people involved in organizing the event and the time each of them spent on the project.

Setup/teardown/logistics time

Climeet lets you account for emissions from your setup and teardown teams based on the number of days worked per person. However, this data can also be entered more precisely in the “Staff transport” section if you know the journeys made by all your teams.

👉 Who holds the data? The suppliers in charge of setting up and tearing down your event (general contractor, production management, audiovisual, etc.).

2. Passenger transport

This is usually the largest emission category, by far: according to ADEME, transport accounts on average for 79% of an event’s footprint. It covers travel by staff, suppliers, volunteers, speakers and above all attendees, as well as shuttles and travel during the event. Three variables need to be documented for each flow: the number of people, the distance and the mode of transport.

👉 Who holds the data? The event agency, all suppliers, the travel agency, and above all the attendees themselves. Hence the value of collecting the mode of transport right from the registration form, via your EMS (attendee management platform).

3. Freight

The transport of goods deserves a category of its own: delivery of technical equipment, structures and furniture, catering deliveries, and collections at the end of the event. Every outbound trip implies a return trip. Optimizing loads and consolidating deliveries are simple and often overlooked levers. For a trade show, this data must also be collected from exhibitors, notably through the registration form (see our article on the registration form).

👉 Who holds the data? Every supplier delivering equipment, the carriers and the caterer: number of trips, distances, vehicle types.

4. Equipment and space design

All equipment rented or purchased for the event is included in the assessment: structures and stands, furniture, carpeting, technical equipment (sound, video, lighting), signage. Only the venue’s permanent equipment can be excluded.

The key variable in this category is reuse: the more events a piece of equipment is used for, the more the footprint of its manufacture is amortized. Hence the rule: favor rental and reuse, and avoid single-use custom builds.

👉 Who holds the data? The various suppliers (technical, furniture, set design, etc.), whose data can be gathered through the agency. For a trade show, the general contractor for shell scheme stands, and the exhibitors for space-only stands.

5. Energy and water

Lighting, sound systems, heating, air conditioning, restrooms: consumption varies widely depending on the type of venue (indoor or outdoor) and the energy sources used (power grid or generators). Favor data from invoices or meter readings, which are more reliable than estimates.

A classic pitfall: double counting. If the venue provides you with the total electricity consumption for your event, don’t also count that of your technical equipment, as it is already included.

👉 Who holds the data? The venue. Failing an exact reading, an estimate is still possible based on floor area, duration and the use of heating or air conditioning.

6. Catering

Often among the highest-emitting categories. Three factors weigh heavily: the composition of meals, the origin of the products and the type of tableware. The gap between menus is huge: according to ADEME’s Impact CO₂ comparison tool, a meal with beef represents about 7 kg of CO₂e, compared with 0.5 kg for a vegetarian meal, a factor of 14.

👉 Who holds the data? The caterer, the restaurants and/or the venue if it has an in-house restaurant.

7. Accommodation

As soon as your event generates overnight bookings, this category must be quantified: number of nights, type of accommodation (hotel, guesthouse, campsite) and distance to the venue, along with the associated mode of transport. It concerns all event stakeholders (attendees, suppliers, speakers, exhibitors).

👉 Who holds the data? The agency, the venue, or the attendees directly. Here again, the registration form is your best ally. For a trade show, this data must be collected from exhibitors.

8. Goodies and communication

A goodie combines raw material extraction, manufacturing, transport and end of life, for an item that is frequently thrown away or forgotten. The best goodie is the one that isn’t produced: consider intangible alternatives (show tickets, donations to a charity). This category also includes printed communication (flyers, programs, badges), which is almost always single-use, and digital usage (emails, registration platform, livestreams), whose impact is moderate but growing, especially for hybrid events.

👉 Who holds the data? The agency, the EMS, and you: quantities ordered, print volumes, digital audience.

9. Waste

Waste production follows directly from your design choices: rental rather than custom builds, set design, signage. And the final footprint depends partly on the treatment method: recycling, composting, landfill and incineration have very different impacts. Document by waste stream: cardboard and paper, plastic and carpet, organic waste, wood, metal, glass and finally general waste.

👉 Who holds the data? The venue, the suppliers, and the caterer for organic waste.

The habit to adopt: ask for the data before signing

The common thread running through these 9 categories, as you’ll have noticed: the data is almost always held by a third party (venue, caterer, technical supplier, carrier, EMS). The carbon assessment is therefore decided at the contracting stage: include the obligation to provide consumption, equipment, delivery and waste data in your contracts and calls for tender. Asking for a reading six months after the event is a guarantee you’ll never get it.

That’s exactly the logic behind Climeet: you can invite your suppliers to enter their data directly into the tool, with a customized template, and turn that information into a carbon assessment that complies with reference methodologies, without spending weeks on it.

💡 To go further, download our Playbook for a low-carbon event, a complete guide to measuring, reducing and managing the impact of your events.

Blog Post

Nos derniers articles

Découvrez nos derniers articles pour rester informé et inspiré. Restez à jour sur les sujets tendances de l'événementiel bas carbone avec nos publications récentes.

Articles de blog

Vous aimerez aussi